The PULSAIR CHOICE Mattress Replacement is designed to bring maximum flexibility of pressure area care to patients in the home care environment. Mix and match the PULSAIR CHOICE power unit with the mattress replacement, mattress overlay or cushion for simple, cost-effective stepping up or down of pressure care for patients at all risks of pressure damage.
PULSAIR CHOICE cushion and a PULSAIR CHOICE Overlay are available
TISSUEgard air cell technology
The unique patented TISSUEgard air cell design features a pleated surface giving up to 15% additional support area, allowing the patient to immerse into the mattress, virtually eliminating lateral tension in the mattress surface. This results in reduced pressures, shear and friction, the key contributory factors to tissue damage, and alleviates the need for a dedicated heel zone.
AUTOsupport - fully automatic pressure adjustment.
AUTOsupport feature automatically adjusts pressure within each of the cells throughout the cycle so that support, posture and therapy are constantly maintained at optimum levels, in response to patient weight, movement and position. Equalisation of cell pressure automatically takes place at each stage of the cycle, again to ensure precise pressure and therapy is applied.
ODS cell design for optimum patient support and security
Air cells feature ortho-differential support (ODS) which provides optimum internal cell pressures for varying body weights and shapes, automatically compensating for the patient’s BMI. Narrower in the centre than at the outer edge, air cells feature in-built support pressure differential, supporting the smaller, lighter patient on the softer central area of the cell, and the larger, heavier patient on the firmer outer edges, as well as providing a feeling of security for the patient.
Our range of patient care products feature a variety of benefits which are tailored for patients depending on their care environment i.e. care home
A mattress replacement system is intended to be used in place of the existing bed mattress
Dynamic surfaces for patients at high risk are also suitable for managing existing pressure damage
A dynamic 1-in-4 alternating pressure cycle provides regular relief for pressure points
AUTOsupport feature automatically adjusts pressure within each of the cells throughout the cycle so that support, posture and therapy are constantly maintained at optimum levels, in response to patient weight, movement and position
TISSUEgard air cell technology with ODS
Low air loss feature reduces humidity and helps maintain the patient's skin at ambient temperature
Adjustable comfort control allows the carer to adjust the control setting in either therapy mode to help patient compliance
PHASE FLOW pressure control pump operates on demand only, reducing power consumption, noise and extending service life
Audible and visual system status/fault indicators
Flush-fitting simple and effective rapid deflation valve removes air from the mattress to enable CPR procedures
Patient transport facility allows unpowered support of patient during transfers or during times of power failure
Vapour-permeable, waterproof, two way stretch cover
Welded cover seams to reduce the risk of ingestion of fluids and contamination of interior
Removeable cover is fully launderable
Repairable/Serviceable on site
Available to purchase on-line| Power Unit | |
|---|---|
| Width | 335mm |
| Height | 233mm |
| Depth | 165mm |
| Weight | 3.4kg |
| Alternating Cycle Time | 15 mins |
| Replacement | |
|---|---|
| Length | 1950mm |
| Width | 890mm |
| Depth | 180mm |
| Inner Construction Materials | ODS deep cell PU air cells set |
| Cover Material | PU coated stretch nylon |
| Number of Cells | 30 |
| Max. User Weight | 200kg / 31 stone |
| Min. User Weight | None |