Suitable for the prevention and treatment of pressure ulcers within all care environments, the QUATTRO ACUTE mattress replacement system features Active QUATTRO THERAPY and Continuous Low Pressure Therapy modes, together with AUTOsupport fully automatic pressure adjustment and the unprecedented low interface pressures of DEEP CELL THERAPY.
QUATTRO THERAPY - clinically proven pressure relief, lower interface pressures and enhanced comfort.
During the 1-in-4 Active cell cycle the patient is supported on at least 75% of the mattress surface at all times whilst the pressure on 25%
of the body is relieved. This provides a higher level of comfort and lower average support pressures compared to 2 or 3 cell cycle systems, together with increased patient compliance.
DEEP CELL THERAPY - support pressures of 30mmHg or less
The unique design of the air cell in combination with the 24cm deep mattress and QUATTRO THERAPY allows for extremely low interface pressures in the inflated cells. Whilst providing pressure relief during the Active cycle, pressures in the supporting cells are significantly lower than industry standard with interface pressures of less than 30mmHg throughout 100% of the cycle. Furthermore, the Deep Cell design is proven to benefit patients in relation to comfort and sleep disturbance.
AUTOsupport - fully automatic pressure adjustment.
AUTOsupport feature automatically adjusts pressure within each of the cells throughout the cycle so that support, posture and therapy are constantly maintained at optimum levels, in response to patient weight, movement and position. Equalisation of cell pressure automatically takes place at each stage of the cycle, again to ensure precise pressure and therapy is applied.
Continuous Low Pressure Therapy - optimum pressure distribution.
When in Continuous Low Pressure therapy mode pressure is equalised within the cells, allowing greater immersion into the mattress surface and optimum pressure distribution.
TISSUEgard air cell technology
The unique patented TISSUEgard air cell design features a pleated surface giving up to 15% additional support area, allowing the patient to immerse into the mattress, virtually eliminating lateral tension in the mattress surface. This results in reduced pressures, shear and friction, the key contributory factors to tissue damage, and alleviates the need for a dedicated heel zone.
ODS cell design for optimum patient support and security
Air cells feature ortho-differential support (ODS) which provides optimum internal cell pressures for varying body weights and shapes, automatically compensating for the patient’s BMI. Narrower in the centre than at the outer edge, air cells feature in-built support pressure differential, supporting the smaller, lighter patient on the softer central area of the cell, and the larger, heavier patient on the firmer outer edges, as well as providing a feeling of security for the patient.
Our range of patient care products feature a variety of benefits which are tailored for patients depending on their care environment i.e. hospital
Our range of patient care products feature a variety of benefits which are tailored for patients depending on their care environment i.e. care home
A mattress replacement system is intended to be used in place of the existing bed mattress
Dynamic surfaces for patients at very high risk are also suitable for managing existing pressure damage
Dual therapy modes - Active 1-in-4 cycle or Continuous Low Pressure
DEEP CELL THERAPY support pressures of 30mmHg or less. The unique design of the air cell in combination with the 24cm deep mattress and QUATTRO THERAPY allows for extremely low interface pressures in the inflated cells
AUTOsupport feature automatically adjusts pressure within each of the cells throughout the cycle so that support, posture and therapy are constantly maintained at optimum levels, in response to patient weight, movement and position
Low air loss feature reduces humidity and helps maintain the patient's skin at ambient temperature
Adjustable comfort control allows the carer to adjust the control setting in either therapy mode to help patient compliance
PHASE FLOW pressure control pump operates on demand only, reducing power consumption, noise and extending service life
Audible and visual system status/fault indicators
Flush-fitting simple and effective rapid deflation valve removes air from the mattress to enable CPR procedures
Necessary for some nursing procedures, the maximum inflation mode inflates the mattress to maximum static pressure for a set period of time before returning to previous mode of operation
Patient transport facility allows unpowered support of patient during transfers or during times of power failure
Vapour-permeable, waterproof, two way stretch cover
Welded cover seams to reduce the risk of ingestion of fluids and contamination of interior
Fully machine washable, the entire mattress can withstand the thermal disinfection washing procedures described in the Department of Health Circular HSG(95)18
Cable management facility on mattress
Repairable/Serviceable on site
Available for daily rental| Power Unit | |
|---|---|
| Width | 335mm |
| Height | 233mm |
| Depth | 165mm |
| Weight | 3.4kg |
| Alternating Cycle Time | Variable |
| Mattress | |
|---|---|
| Length | 1980mm |
| Width | 880mm |
| Depth | 240mm |
| Weight | 12.5kg |
| Inner Construction Materials | PU air cells |
| Cover Material | PU coated stretch nylon |
| Number of Cells | 27 |
| Max. User Weight | 250kg / 39 stone |
| Min. User Weight | None |